1. Isolate and prepare the tooth surface to be restored.
2. Apply an adhesive, such as the Simplicity Self-Etch Adhesive System or Surpass^® Self-Etch Adhesive System, according to the manufacturer's instructions.
3. Using the appropriate shade of Titan, place a 1 mm layer of Titan onto the floor and walls of the cavity preparation. Light-activate the layer for 20 seconds.
4. Continue to build the restoration using the composite material of your choice. The composite material should be used according to the manufacturer’s instructions.

NOTE:  To prevent excess material from extruding out of the syringe, pull the plunger back immediately after the desired amount is dispensed.

NOTE:  Titan can be light activated with LED, halogen or other conventional curing lights.

NOTE:  Titan should be used with 18 or 20 gauge tips

NOTE:  Titan White Opaque should be light activated for 40 seconds