- Rinse the preparation thoroughly and remove all visible water by drying the surface for approximately 5 seconds with dried compressed air. Do not desiccate the tooth surface.
- Dispense a drop of Superb Universal Bond into the cavity of the enclosed mixing well. Using an applicator bristle-type brush, apply 1 coat of Superb Universal Bond to the entire cavity preparation and the surrounding tooth structure, allow to dwell for 20 seconds. DO NOT DRY.
- Using the remaining material in the well and same applicator, apply 2 additional coats of Superb Universal Bond.
- Dry the surface thoroughly. Do not blast the surface with air or use suction as this could remove material from the surface and lead to debonds or post operative sensitivity.
- Light-activate for ten seconds. Superb Universal Bond can be activated with any dental activation light.
- Continue restorative procedure with material of choice. Follow manufacturer’s instructions for all restorative materials.
NOTE: Deciduous teeth are treated in the same manner as permanent teeth.
NOTE: Uncut enamel should be roughened or etched prior to bonding.
NOTE: Superb Universal Adhesive is always light-activated before placing veneers and bonded crowns.