Printable PDF Instructions

Seamfree Instructions

Syringe:

1. Install applicator tip on the Seamfree syringe.
2. Dispense a small amount onto patient napkin to be sure material is flowing freely from the syringe.
3. Apply Seamfree to the desired surfaces to be lubricated or "de-tackified". The surface may be an instrument or uncured composite material.
4. Continue with the placement of the composite materials. Activate all composite materials according to manufacturer’s instructions. Seamfree will co-cure with the composite material being used so separate activation of Seamfree is not required.

Bottle:

1. Dispense one drop of Seamfree into a well.
2. Apply Seamfree to the desired surfaces to be lubricated or "de-tackified". An instrument may be dipped into the Seamfree or the Seamfree may be applied to an instrument or uncured composite material.
3. Continue with the placement of the composite materials. Activate all composite materials according to manufacturer’s instructions. Seamfree will co-cure with the composite material being used so separate activation of Seamfree is not required.

NOTE: Only a thin layer of Seamfree is necessary. Avoid excess build up to ensure acceptable results.